BD Loops SC 28-200 Preformed Saw-Cut Inductance Loop
The BD Loops SC28200 is a preformed saw-cut inductance loop available in 4x10 or 6x8 configurations with a 3/16" slot profile and 200' lead-in, made with 16 AWG copper wire and rated for direct burial use.
Overview
The BD Loops SC28200 is a complete preformed saw-cut inductance loop featuring a fixed loop size and a 200' lead-in run, 4x10 or 6x8 foot configurations, this loop is built for installations where a 3/16" or wider slot is cut into concrete or asphalt. The loop wire is inserted into the saw-cut slot and sealed with loop sealant. Constructed with 16 AWG copper wire, it is rated for direct burial use. A durable outer jacket binds and protects both the loop and lead-in conductors.
Key Features
- Thick outer jacket provides an extra layer of protection for both the loop and lead-in.
- Factory tested 3 ways before leaving the facility.
- Built-in backer-rod — no separate backer-rod needed when installed in a 3/16" saw-cut groove.
- Tightly bound lead-in in a protective outer jacket, eliminating the need for twisting.
- Both loop and lead-in fit into a single 3/16" wide saw-cut groove — no double cutting the lead-in run.
- Loop fills a larger percentage of the groove, requiring 30–40% less sealant compared to a 1/4" wide groove.
- Cuts don't need to be exact — any BD Loop can be made up to 4' smaller for consistent fit.
- Compatible with the BD-LS flat 3/16" sealant tip for a smooth, even seal in a single pass.
Specifications
- Model: SC28200
- Loop Sizes: 4x10 or 6x8
- Lead-In Length: 200'
- Slot Width: 3/16" (minimum)
- Wire Gauge: 16 AWG copper
- Burial Rating: Direct burial
The BD Loops SC28200 delivers a reliable, professionally engineered saw-cut loop solution designed to simplify installation and reduce material use.