Maximum Controls MAX-2200-PRO 24V DC Sliding Gate Operator
The Maximum Controls MAX-2200-PRO is a 24V DC brushless, continuous duty sliding gate operator rated for gates up to 2,200 lbs and 60 ft, backed by a 5-year limited manufacturer warranty.
Maximum Controls MAX-2200-PRO Sliding Gate Operator
The MAX-2200-PRO is a robotic DSP-controlled sliding gate operator engineered for high-traffic gated communities, commercial and industrial applications, and public storage facilities. It is capable of moving gates up to 2,200 lbs and 60 ft in length at a speed of 12 inches per second. The cover and access doors are constructed from quarter-inch UV-protected, high-impact polyurethane material for long-term structural stability and fade resistance. A lockable cover with key lock release allows for quick servicing while deterring unauthorized access. In most cases, the MAX-2200-PRO can be directly bolted onto concrete pads used by the most popular gate operators in the industry.
Key Features
- Continuous duty brushless DC motor equivalent to 1¼ HP AC motor
- Adaptive DSP control for advanced brushless DC motion control — state machine design electronics with ultra-fast microprocessor
- Matrix-III board — solar ready with built-in advanced solar regulator; with Solar Combiner, up to 4 Solar Power Packs with 200W solar panels can be wired together to form a single-ended 24VDC supply source
- 24VDC battery backup module providing up to 200 full cycles in the event of power failure; three modes of selectable battery backup functions
- Intelligent ramp-up and ramp-down gate speed control; selectable short or long ramp-down
- Independent opening and closing speed control for primary and secondary
- Programmable gate speed controls — 16 selectable speeds
- Selectable open timer 0 to 60 seconds with timer off option
- Operational temperature range: -4°F to 165°F (-20°C to +74°C), including battery performance without requiring a heater
- Robust lightning protection up to 20KVolts and 10KAmps on all inputs and outputs (44 channels), including loop detector input connections
- Real-time performance analyzer and event log (OBD Port and Black Box) — 8,000 events including error failure history
- LCD display reporting past and recent errors
- Low voltage wiring capability for remote power-up 500 feet (no battery needed)
- Switchable 115/230 voltage selection
- Direct gear drive — no internal chains, belts, or pulleys; heavy-duty direct drive gear box size 60, 30:1 gear ratio
- Corrosion protection via gold zinc coating and electrostatic powder coating
- Programmable virtual OPEN & CLOSE limit; limits auto-set in the event of total power loss
- On-board three-button station
- High-traffic intuitive loop management system
- Advanced anti-tailgate features
- Tamper alert relay outputs trigger "on" if gate is forced open; audible alarm if gate is tampered with or ERD is triggered
- Magnetic lock control relay outputs with selectable delay times
- Gate partial open recorder — programmable inputs allow partial open cycles for high-traffic gates while providing complete open cycles for emergency vehicles
- Fire department compliance — gate auto-opens upon loss of AC power or battery depletion
- Optional chain drop sensor detects unauthorized chain drops when using magnets option
- Motor overcurrent safety shut-off for additional protection
- Gate status outputs for gate monitoring
- Gold contact input connections and automobile-grade connectors
- Modular system design for ease of service
- Includes 25 ft nickel-plated chain & brackets
- 5-year limited manufacturer warranty
- Additional entrapment prevention devices required
Specifications
- Operating Voltage: 24VDC (switchable 115/230VAC input)
- Gate Capacity: 2,200 lbs
- Maximum Gate Length: 60 ft
- Gate Speed: 12 inches per second (Class I, II, III, and IV)
- Dimensions: 14.5"W x 19"D x 25.5"H; 7.5" chain height
- Shipping Weight: 158 lbs
- Gear Box: Size 60, 30:1 gear ratio
- Motor: Continuous duty brushless DC, equivalent to 1¼ HP AC
- Temperature Range: -4°F to 165°F (-20°C to +74°C)
- Battery Backup: 24VDC, up to 200 full cycles
- Lightning Protection: Up to 20KVolts / 10KAmps, 44 channels
- Event Log: 8,000 events
- Remote Power-Up Wiring: Up to 500 ft low voltage
- Cover Material: ¼-inch UV-protected high-impact polyurethane
Compatibility
- In most cases, the MAX-2200-PRO can be directly bolted onto concrete pads used by the most popular gate operators in the industry, making it compatible with many existing installations.
The Maximum Controls MAX-2200-PRO is a purpose-built solution for demanding access control environments where performance, security, and reliability are non-negotiable.