GateArms+ CONTROL-GATE LED Controller Device
The GateArms+ CONTROL-GATE is a programmable LED Controller Device for gates (patent # 11089662) that interprets signals from an operator or sensor to intelligently change LED colors and flashing patterns.
Overview
The GateArms+ CONTROL-GATE is a patented (patent # 11089662) programmable LED Controller built to control the color and flash behavior of LED strips when connected to commercial gate equipment. The Controller interprets signals received from an operator or sensor and can accommodate many complex scenarios. Units are shipped from the factory pre-programmed and ready to use. Re-programming can be performed using a PC configuration tool downloadable from GateArms.com, or with a simple jumper wire. Proudly manufactured and quality tested in the USA.
Key Features
- Two 4-pin headers for connecting one to four LED strips
- One 4-pin header for connecting 4-conductor signal wire — Gate Controller: GND | Close | Open | Aux
- VDC power header for connecting to DC power supply
- USB header for connecting to PC
- Unique serialized numbering for easy device tracking
- Pre-programmed and ready to use out of the box
- Re-programmable via PC configuration tool or jumper wire
Specifications
- Dimensions (L x W x H): 4.18 x 2.31 x 1.25 in. / 107 x 60 x 19 mm
- Power: 24VDC power in/out (must use 24VDC LED strips)
- Environmental Limits: -30°F to 135°F
- Connector: USB-Type C
- Case Material: Flame Retardant ABS
- Case Flame Rating: UL94-5VA
Compatibility
- Windows XP / 7 / 8 / 10 / 11 compatible (via USB-Type C PC configuration tool)
- Requires 24VDC LED strips
Contact GateArms+ Tech Support or refer to the installation manual for detailed programming instructions.