KICKER ROLLER BRACKET (3”)
The All-O-Matic 13 Kicker Roller Bracket (3") is jamb track hardware designed for California Lift Gates, used to position and support the kicker wheel during J-track installation.
Overview
The All-O-Matic 13 Kicker Roller Bracket (3") is a component of the jamb track hardware system for California Lift Gates. It is installed by aligning the center of the kicker wheel bracket with the designated mark on the jamb, then clamping and welding in place. The kicker wheel is centered with the gate side rails, and the shaft is welded to the kicker bracket.
Key Features
- Kicker wheel bracket centers with gate side rails for precise alignment
- Designed for clamp-and-weld installation on jamb
- Used in conjunction with J-track, main pivot angle bracket, and track roller brackets as part of a complete California Lift Gate jamb track system
Specifications
- Kicker Wheel Centerline Height (Mark B) — Standard: 27"
- Kicker Wheel Centerline Height (Mark B) — Jumbo: 30"
- Kicker Wheel Centerline Height (Mark B) — Heavy Jumbo Long & Jumbo Long: N/A
Installation Note
Marks on both jamb sides must be level before placing hardware — uneven marks will make gate balancing impossible.
Order the All-O-Matic 13 Kicker Roller Bracket to keep your California Lift Gate jamb track installation properly aligned and structurally sound.