SPRING CONNECTING LINK BOLT - 1/2"
SKU
aom-25-5
The All-O-Matic 25-5 is a 1/2" Spring Connecting Link Bolt designed as jamb track hardware for California Lift Gates.
Overview
The All-O-Matic 25-5 is a 1/2" Spring Connecting Link Bolt, part of the jamb track hardware system used with California Lift Gates. This hardware is engineered for vehicular doors and gates and must be installed, adjusted, and serviced by a qualified service professional.
Key Features
- Designed for use as part of a California Lift Gate jamb track hardware system
- Compatible with hardware sets covering a range of gate weights and sizes
Important Safety Notice
- This hardware is for vehicular doors and gates. It must be inspected monthly for wear and lubricated as needed.
- Only a qualified service person should work on the gate or hardware.
- Springs are under tension. If you are not a service professional, do not attempt to adjust or change springs — they can cause serious injury or death.
Compatibility
This component is part of the All-O-Matic jamb track hardware system, which is available in the following configurations:
- Regular Short Set: 350 LBS, 19' wide, 6'6"–7' height
- Regular Long: 350 LBS, 19' wide, 7'–7'6" height
- Jumbo: 450 LBS, 20' wide, 7'–8' height
- Heavy Jumbo: 550 LBS, 22' wide, 7'–8' height
- Heavy Jumbo Long: 650 LBS, 22' wide, 8'–10'6" height
Trust All-O-Matic for reliable jamb track hardware components built to support safe, long-term gate operation.
Write Your Own Review
